Specifications:
Material: copper
Color: blue and gold
Size: 3.35*1.38*2.36in
Weight: 15.56oz
Package Content: one cut off switch, two remote controllers
Current Rating: 240A
Operating Voltage: 12V-24V
Actuator Type: Push Button
Temperature Control Range: 60°
Remote Control Range: 328 foot
Notes:
-This car battery disconnect switch is suitable for most car models, but not for cars with the following conditions:
-Cars that can’t be disconnected to change batteries.
-Installation is not recommended for cars without a spare mechanical key.
-If the power goes out, the alarm will go off.
Installation Method:
-The whole process you need to use the handle to complete the installation.
-Step 1: Remove the negative wire and connect to the disconnector.
-Step 2: Connect the positive wire.
-Step 3: Move the negative wire to the disconnector head.
-Lastly: lock the screws.
【Convenient】: This battery disconnector is very convenient and can be remotely controlled, which greatly saves your time. Moreover, it does not need to change the original car line, so the installation does not damage the original car line wireless, cut the line and wiring can be restored at any time. In addition, it is insulated and heat-resistant, even if there is liquid in the battery can be heat-resistant, rest assured use.
【Protective】: Our disconnect switch can intelligently detect the battery running leakage, timely and automatically disconnect the battery main switch and lock 60% of the power for the next time to start the vehicle, and at the same time to ensure that the battery will not be bad. The unprotected battery is very easy to break down. The battery is finished leaking 1 time, the capacity of the battery is reduced by 30%. By the 3rd leak, the car will obviously have no power to fire up.
【Automatic Disconnection】: The battery disconnect switch will automatically disconnect when the voltage is lower than 11.9V, which means that it will disconnect when the leakage is detected and lower than the threshold value of 11.9V after stopping the car and turning off the engine. And the work indicator light from blue to red and delayed for about 5 minutes after the automatic cut-off. This avoids the problem that the battery will be damaged and can’t be ignited after power loss.
【Preventing Accidental Switch-off】: This is a function to prevent pressing to the remote control by mistake when the vehicle is moving, causing the battery to cut off, so that the vehicle’s generator can not charge the battery. When the anti-false switch-off function is running (indicator light is on), when the ignition is turned on, pressing the pass-control OFF and panel OFF as well as the mobile phone power-off key will be automatically prohibited.
【Leakage Checking】: This function will be automatically turned on when the vehicle is switched off. You only need to switch off the headlights, indicator lights and doors, then you can view the leakage.. When the light indicator is on: it means the leakage is about 0.5-2A; when the middle indicator is on: it means the leakage is 2-5A; when the high indicator is on: it means the leakage is more than 5A.
