Product Description
MAKE EVERY ACCELERATION/BRAKING FULL OF PASSION!
● Color：Red / Blue / Silver
● Weight：5.88 oz
● Material：Aluminum alloy, PVC plastic
● Packing：1x Gas pedal cover, 1x brake pedal cover, 1x set accessory screws
COMPREHENSIVE PROTECTION! GIVE YOU THE SAFEST DRIVING EXPERIENCE!
● Premium aluminum alloy, increased pedal area, anti slip rubber particles, and cool exterior design!
● This is the latest car pedal cover! We are committed to creating the most comfortable and safe driving conditions for you!
● Let you control the throttle and brake more freely and smoothly, adding a sense of comfort and peace of mind to driving.
FIRMLY FIXED+EASY INSTALLATION
*About Product Dimensions：
● The size of the gas pedal is：3.14×5.9 inch
The applicable dimensions of the original car pedal are：width<1.77 inches, length<5.9 inches
● The size of the brake pedal is：5.11×3.46 inch
The applicable dimensions of the original car pedal are：width ≤ 3.15 inches, length ≤ 4.13 inches
*About Purchasing Instructions：
● Before purchasing, please be sure to remove the original car pedal cover to measure the actual size of the car pedal. If the size meets the requirements, it can be installed normally. If it exceeds the size range, it needs to be drilled for installation.
THE INSTALLATION METHOD IS SHOWN IN THE FIGURE
*About Installation Matters：
● If the foot pedal is still loose after installation, please check and reinstall it.
● If the foot pedal catches the felt or touches the intermediate wall, it may cause the foot pedal to lose its function and be bounced back. At this point, loosen the screws and move the foot pedal.
● Maintain a space of no less than 0.2 inch between the foot pedal and the sidewall to allow the pedal to work freely and avoid danger.
● Installation and commissioning work can be carried out after the car is stopped and completely turned off.
Before each car pedal cover is shipped, we check and test it for you, and we believe you will receive a flawless product!
✨ Anti-Slip Design: We are committed to creating exquisite and safe gas pedal covers! If you are still using the original pedal of the car, you will find that impurities such as rainwater and sand on the sole of the shoe can cause the pedal to slip, thereby affecting normal driving. And our brake pedal cover is designed with anti slip particles on the surface, which can greatly increase the friction between the sole and pedal, providing you with the safest driving experience!
✨ Super Cool Appearance: If you want to make your car more cool, of course, you can’t forget every corner and detail inside the car. This brake pedal pad comes in three colors: red, blue, and silver. Its dynamic appearance and metallic texture can add mysterious and fashionable elements to your car. At the same time, the increased pedal contact area will allow you to control the accelerator and brake more freely, driving more easily.
✨ Exquisite Craftsmanship: You will definitely be amazed by the hard material of this car pedal cover! It is made of premium aluminum alloy and PVC plastic, with exquisite workmanship. In the process of use, not easy to rust, wear and other conditions, can accompany you and your car for a long time. The car pedal pads can perfectly fits your accelerator and brake pedals, ensuring your safe driving.
✨ Universal Dimensions: The size of the brake pedal cover is 3.46×5.11 inches, and the size of the gas pedal cover is 3.14×5.9 inches. It is compatible with most automatic transmission models. Amazon’s PCFit reference data may not be completely accurate. Before purchasing, you can first measure the actual size of the car’s original foot pedal and then confirm whether the product is compatible with your car. For the correct measurement method, please refer to the detailed description page.
✨ How to Install: The installation of car pedals is very simple, you don’t need to drill holes on the original pedals at all. 1.Clean the original pedal of the car. 2.Install screws on the pedal cover (do not tighten them yet). 3.Fit it onto the surface of the original car pedal. 4.Snap the screw clip on the back of it onto the original car pedal. 5.Use a screwdriver to tighten the screws on the surface of the pedal cover. The installation is complete!
Customers say
Customers like the appearance of the auto accessory, saying it looks great and the color is nice. However, some customers have reported issues with the installation, saying the steps and parts are difficult to read and use. They also say the instructions are extremely vague and the product comes with no tools. Customers also mention the fit is poor and the quality is poor. They describe the value as cheap and a waste of money.
AI-generated from the text of customer reviews
